Other

A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

- Tubular alloy construction - Padded hand grip section - Integrated, replaceable and adjustable padded arm rests - Easy clip on installation fits most road bars - Clamp Size: 22.2–25.4mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

• With bolt & nut • 1 1/8-inch = 28.6mm • 1-inch = 25.4mm

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Stainless steel button head bolts - Sold in bags of 10

• Aluminum • CNC-finished

- Aluminum w/lock nut and mount - Slotted mount design

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish

- Replacement front cable hanger - Aluminum construction

• Aluminum clamp with a chromoly bolt

- DT Swiss cartridge bearings - Sold in pairs

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

• Quick-release seatpost clamp • Chrome-plated chromoly • Rubber-covered handle for a great grip

• Aluminum clamp • Built-in rear rack mount

• Quick-release seatpost clamp • Aluminum lever and cap with a 6mm chromoly bolt

- Rust resistant coating - M5x.80mm Thread pitch - Bag of 10 - Size: M5 x 16 Thread Pitch: Braze-on bolt

Sunlite's Lowrider Sissy Bar adds that level of style and classic looks that only a nice, long sissy bar can. Keep that banana seat comfortably slung and looking tight.

Replacement bearing for the lower half of YST8003 #7 headset.

• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts

- Cartridge Bearing - 1-3/8-inch Outer Diameter

- Rubber - Color: Black

• Forged aluminum seat clamp • Chromoly integrated QR seat binder bolt • Increased durability and clamping force

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Crown Race MX - Size: MX TH 26.4mm

- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

- Rust-resistant coating - M8x16mm - Shell: 8mm flanged axle bolt - Includes 2 bolts

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Standard replacement cantilever/v-brake bosses

- Sunlite replacement cartridge bearings - Sold in pairs

Replacement LH cup for English threaded European bottom brackets. - Cup Material: Steel

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Alloy construction - Great for Cruiser or BMX bar conversions

- Hub sealed bearing - Fit: ID 15mm - I.D.: 15mm - O.D. 28mm - Width: 7mm

- Replacement M5 lock nut for cable anchor bolts, fender bolts, etc. - Bag of 10

- w/Nut - 1-3/4-inch

46 x 55 x 51 x 152mm

- Chrome allen seat binder bolt

- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm

- Ahead Stem Shim allows the use of 1-1/8 stem on 1" steerer tube - 28.6mm/25.4mm

- Use: S.I.S. - Length: 30mm

Sunlite braze-on front derailleur adapter

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

- Type: Lock washer - Size: 1" Keyed

- Crown Race - Size: 27.0mm

- Axle mount rear derailleur guard - Essential for children`s multi-speed bikes

- Large Flange-Fits Splined MX Cranks - Sold in pairs

- Replacement padded arm rests for clip-On Tri-Bar II - Easy clip on installation fits most road bars - Clamp Size: 22.2mm

• Quick-release seatpost clamp • Full stainless-steel construction • Rubber-covered handle for a great grip

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

- Standard steel replacement

- 8x1mm Allen head

- Universal design double rail saddle clamp

Designed for maximum comfort, ergonomics, & durability - Bag of 10

- Fits Shimano and ISIS BBs - Single key release - Shell: 15mm SHI/ISIS axle bolt one-key release - Sold in pairs