Parts

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Aheadset preload adjusting bolt

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Used between the caliper and fork/Frame mount to space the disc brake caliper to the correct rotor plane

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 5mm ID for use with most braking cables

- w/Nut - 1-3/4-inch

- 8x1mm Allen head

- Model: Replacement bolt - Compatibility: Allen, M5x16

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Aluminum w/lock nut and mount - Slotted mount design

- Crank dust cap - Works with most three-piece crank models

- Chrome - Sold individually

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Stainless steel pedal washers - Sold in pairs

Origin-8's 1 1/8-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses and lots of cool colors to add style to your ride. You get a bag of 10 spacers.

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Standard steel replacement

- Hoods with (FD) are Flight-Deck compatible

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Brass compression olive for Hope hydraulic disc brakes.

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.