Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Bottom Brackets
KEY FEATURES
- External bottom bracket designed for threaded bottom brackets
- The machined aluminium cups hold stainless steel cartridge bearings in stainless races
- High quality stainless steel bearings give a much greater life span than stock units
- Cartridge bearings are replaceable
- Suitable for 68, 73, 83, 100 and 120mm width bottom brackets
- Options designed to suit 24mm or 30mm crank axles
- 30mm only: Please note specific fitting tool (HTT188) needed to fit bottom bracket. Available separately
- Available with replaceable stainless bearings for less friction and greater durability
- Suitable for road, mtb, DH and fatbikes
- Free running labyryinth seal protects bearings and has less drag
- Weight 24mm: 110mm | 30mm: 102g
**Note - Some Power Meter cranks do not offer the clearance required over the BB cup, please ensure there is clearance before fitment.**
$9.49
- Fits 3-piece crank set
- Includes right and left cup, lockring and bearings
- English type
- Shell: 68/73mm
- Cup Material: Steel
- Weight: 123 grams
$11.99
- Thread: BC 1.37 x 24T
- Caged bearing 1/4" x 9
- Fits most square taper cotterless BB axles
- Spindle Type: SQR JIS
- Cup Material: Steel
$13.99
- One-piece bottom bracket cup set
- Bearings included
- Fits smaller american juvenile/youth sized BB
- Shell: 65mm
- Cup Material: Steel
- Weight: 173 grams
$15.49
- Fits 3-piece crank set
- Includes right and left cup, lockring and bearings
- English type
- Shell: 68/73mm
- Cup Material: Steel
- Weight: 123 grams
$15.99 - $19.99
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested
$15.99
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested
$15.99
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested
$16.49 - $28.99
- One-piece bottom bracket cup set
- Bearings included
- Shell: 68mm
- Spindle Type: OPC
- Cup Material: Steel
- Weight: 265 grams
$19.00 - $29.99
FSA PowerPro JIS Cartridge Bottom Brackets.
- Includes bolts
- Spindle Interface Type: Square Taper JIS
- BB Shell Width (mm): 68
- BB/Frame Interface: English
$19.99
High performing square bottom bracket interfaces with English frames.
- Fits square-taper spindle cranksets
- Alloy adjustable cups
- Includes 2 axle bolts
$19.99
- Deore-level BB92 press-fit Hollowtech II bottom bracket
- Compatible with all mountain Hollowtech II cranks
$20.99
- Bottom bracket for one-piece crank
- Sealed mechanism
- 24 TPI
- Spindle Type: One piece
- Cup Material: Steel
- Weight: 310-315g
- Cup Type: Press Fit
- Cup OD/Bearing OD: 51mm
$20.99
Shimano BB-ES300 Octalink V2 Bottom Brackets
- Fits Shimano Octalink V2 Spline Cranksets
- Crankarm fixing bolts not included
$26.99
- Steel body
- Steel cups
- Chromoly spindle
- Sealed bearings
- Interface: English
- Square Taper JIS
- Weight: 305-320 grams
$27.84
- Adapters press directly into specific PF30, BB30, BB86 or BBright frames and allow the use of standard Ultra-Torque (UT) crank sets and EPS components
- Updated design increases surface area contact with the frame's bottom bracket, reducing the possibility of noise from frames with slight imperfections
- Ultra-Torque OS Fit BB-cup tool is required for adapter installation
$28.00
Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame.
- Aluminum
- Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame
- Install with headset press (not included) and green Loctite (included)
$30.00
The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces.
- Alloy cups
- Double "snap" seals for water and dirt protection
- Spindle Interface Type: Square Taper JIS
$30.99 - $49.49
- Forged steel body
- Alloy cups
- Chromoly spindle
- Sealed bearings
- Interface: English
- Spindle Type: Square Taper JIS
- Weight: 290-300 grams
$31.99 - $38.99
Shimano's Ultegra bottom bracket uses Pro Tour-proven technology for lighter weight and super smooth spinning, while still maintaining the same level of durability and stiffness. It's available in English, Italian, or Press Fit models.
$33.00
Bottom brackets from FSA for non-threaded applications.
- 24mm spindle compatibility
- Stainless steel bearings
- Spindle Interface Type: FSA MegaExo
- BB Shell Width: 92mm
- Bottom Bracket Shell I.D.: 41
- BB/Frame Interface: BB92
$33.00
FSA (Full Speed Ahead) MegaExo 19 bottom brackets are for use with 19mm diameter spindles.
- Die cast and CNC-machined alloy bearing cups
- 19mm I.D.
- BB86/92 compatible
- BB Shell Width (mm): 92
- Bottom Bracket Shell I.D.: 41
$33.65
Campagnolo ProTech bottom brackets feature a patented external sealing ring design that protects a strong, resilient fiberglass-charged polyamide central tube from the harmful ingress of water, mud and grit.
- Designed specifically for gravel riding and racing to protect against water, mud & grit
$33.99
• Lightweight seal structure removes grams
• Durable anodized finish
• Includes left and right hand cups, spacers, inner cover, and inner o-rings
• Easy installation with TL-FC25 tool
• Compatible with 24mm crank spindles
• English, threaded: 68/73mm bottom bracket
• Pressfit: BB86/92 bottom brackets
$34.99
Race Face bottom bracket spacer kit for 124-130mm bottom brackets.
$35.49
- Designed for fat tire bikes
- Chromoly spindle
- Sealed bearings
$35.99
This FSA Bottom Bracket allows you to run MegaExo and other 24mm spindle cranksets with a BB86/BB89.5/BB92 frame.
- Intended for road use
- Steel bearings
$36.99 - $43.99
Pressfit Model:
• For use on BB86/92 bottom bracket shells
• Compatible with 24mm spindle Hollowtech II cranksets
• BB Shell Width (mm): 92 mm
• BB/Frame Interface: BB86 , BB92
• Bottom Bracket Shell I.D.: 41
• Defined Color: Black
• Spindle Interface Type: Shimano Hollowtech II
Threaded Model:
• Includes 3 x 2.5mm spacers
• Includes TL-FC24 adapter tool
• Reduced size for light weight
• New seal construction for smoother rotation
• Requires TL-FC34 or included TL-FC24 adaptor for installation & removal
• BB Shell Width (mm): 68 mm
• BB/Frame Interface: English
• Defined Color: Black
• Spindle Interface Type: Shimano Hollowtech II
• Weight: 77 g
$38.00 - $41.00
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard
- Significantly lighter than GXP system
Page 1 of 9
Next page