Brakes/Levers/Pads

- Simple, robust, powerful brake for riders who prefer to work with Mineral oil. - The lever is designed with proven lever technologies and features easy adjustment access and superior ergonomic comfort. - The caliper is based on the Code downhill brake and utilizes the same pads. - Post-mount. - Designed for use with Maxima Mineral Oil only.

SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and represents SRAM's attempt at perfecting braking performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!

Cyclocross, adventure, or road—whatever your pursuit, the Force 1 HRD brake lever features our HydroR design, with superb ergonomics for better finger wrap. Enjoy seemingly effortless braking regardless of terrain or condition. Features - Lever body design offers improved finger wrap and improved comfort and control - Internals feature easy access to bleed ports - Master cylinder design featuring optimized pistons and seals for power and control - Flat mount caliper - Left-side lever

- Capable of handling the higher average speeds and increased mass of trail ready E-MTBs. - G2 R lever with a powerful 4-piston caliper derived from the gravity-focused Code brakes.

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. - Uses DOT 5.1 brake fluid - Lever body design offers excellent finger wrap, comfort, and control - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a left-side lever with a rear brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

Caliper only - does not include lever or hose. - Includes steel-backed organic pads

SRAM's Force CX1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike, and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side, hydraulic-brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.

The SRAM Level brake levels the playing field with power and reliability stuffed into a lightweight package. This is no-nonsense performer, but don’t let its understated disposition fool you—Level gives you the art of braking in minimalist form.

Caliper only - does not include lever or hose. - Compatible with all SRAM road hydraulic brake levers - Includes steel-backed organic pads - 18mm Front/Rear - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: DOT - Pad Compound: Organic

CenterLine X rotors are the lighter weight version of SRAM's quiet, smooth, and robust CenterLine rotors. The CenterLine X rotor features a two-piece design with an alloy center and steel brake track. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Lightweight, two-piece design - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: 6-bolt - Includes Steel rotor bolts

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precision braking and shifting performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. SRAM Force 22 is designed to work with 11-speed cassettes. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!

We spend a lot of time obsessing over feel, and SwingLink technology brings our best R&D to life. The G2 RS offers riders the joys of SwingLink—getting brake pads to the rotor fast, then moderating pressure with smooth modulation. It's one small movement for your finger, one monumental upgrade to your braking. - Power organic pads give riders both feel and bite - Bleeding Edge for simple fluid installation and maintenance - Tool-free reach adjust for quick personalization

Guide Ultimate Lever Assembly

Bolt on SRAM's Apex Pad & Holder for excellent braking. The holder design makes it easy to switch pads—meaning this system is great for road and cyclocross bikes alike!

SRAM's Force 1 Hydraulic Brake and Brake Lever is descended from their top-end RED road group, representing SRAM's attempt at perfecting the interface between rider and bike and maximizing braking performance. Designed for a 1 x 11-speed setup, this left-side rear hydraulic-brake carbon lever has the same shape and feel as the Force 1 right lever, but has no shift paddle. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The brakes themselves provide incredible modulation and stopping power. You'll never go back to rim brakes again! - The moto-style set up allows you to hook up your left brake lever to your rear wheel. - Carbon fiber lever blade - Bleed port is easily accessed

Disc brake lever assembly - aluminum lever (assembled, no hose) diffusion black ano - mineral fluid brake - DB8 (A1)

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

SRAM's Force CX1 ErgoDynamic levers are descended from the top-end RED, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike. Designed for a 1 x 11 setup, this left-side, brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.

SRAM's 500 TT ergonomic brake levers slice the wind and make a great addition to any aerodynamic speed machine. The return springs provide a solid feel and help prevent brake drag, while the aluminum levers offer pinpoint control for maximum stopping power. Plus, the internal cable routing gives a clean look and top aerodynamics.

- Includes a washer and 10,12,14,16,18,20,22 and 30mm backing nuts

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline

- Replacement caliper for Force eTap AXS

G2 RSC is the half-ton pickup truck of the mountain bike brake world—dependable, go anywhere, do anything, plenty of power when you need it, and all of the features you need. The new G2 RSC is based on the SRAM Code design, so it puts Code-like power and modulation into a mini-Code package. And, of course, the signature Guide lever-feel and contact-point adjustability ensures that this brake works great for every rider. The G2 RSC presents a rider-oriented offering with an alloy blade, lever pivot bushings, stainless steel hardware. - Useful reach and contact point adjustments for every type of rider. We design our brakes to give each individual rider distinct control of their ride. - We added stiffness in the caliper and a new pad compound that offers more bite to really deliver the Mini-Code feel. - Engineered for easy installation

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.

SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.