Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX

No Image
$18.99 - $24.99
- Made to fit crank spindles and press-fit Mid BB frames. - Simple and easy to install. - Includes an assortment of spacers to optimize chainline and crank clearance. - Odyssey 6061-T6 aluminum dust spacer included.
Odyssey MPEGs Steel Pegs
$14.99
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
WeThePeople Team Pivotal Seatpost
$26.99
WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.
Odyssey Air Supply Inner Tube
$4.99
Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher quality tube will always last longer than a cheap tube during comparable everyday use.
Odyssey Clutch Freecoaster Hub
$189.99
A traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment (can be adjusted without removing the rear wheel), and a plastic hub guard. FEATURES - Super-durable bearing arrangement throughout - Maximum strength axle design Unique external slack adjustment feature - Super-durable drag mechanism design GUARD OPTIONS - Plastic hub guard included (but optional to use) MEASUREMENTS - Drive Side Effective Flange Diameter: 56mm - Non-Drive Side Effective Flange Diameter: 49mm - Drive Side Flange to Center Distance: 27.5mm - Non-Drive Side Flange to Center Distance: 27.5mm
Odyssey Ghost Brake Pads
$8.50
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
Odyssey Gyro G3 Lower Cables
$7.99
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
Odyssey HGS Spokes
$19.99
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.
Odyssey La Guardia Sprocket
$54.99
A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths. - 7075 Aluminum
Odyssey Linear Slic Kable w/K-Shield
$9.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing. (2.9 oz)
Odyssey R32 Fork
$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 32mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
Odyssey Twisted PC Pedals
$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
WeThePeople Buck Bar Dillon Lloyd Signature
$79.99
A beast like pro rider Dillon Lloyd needed a bar built to withstand the biggest drops and burliest of crashes. The Buck bar is one of the first bars in BMX to utilize the new 25.4mm clamping technology, allowing for a stronger, stiffer bar that a rider like Dillon can have full confidence in, without having to worry about it slipping or breaking when things get rough. WeThePeople used time-tested "M2" heat-treated, 4130-chromoly tubing and Dillon's own geometry to create this ultra-dependable set of bars you can get "Buck" with. - Tubing: 7/8" multiple butted - Easy-cut marks on the end of the bars - Dual radius bends for extra strength - Backsweep: 11-degrees - Upsweep: 1.5-degrees - Weight: 22.2mm bar: 895g (31.5oz/1.97lbs), 25.4mm bar: 925g (32.48oz/2.03lbs)
Radio 47 Sprocket Guard
$54.99
Radio PRO Leon Hoppe's signature 47 Sprocket Guard is made to take a real beating. Featuring an integrated 8mm thick alloy guard and a robust CNC machined construction; if you're looking to get tech as hell and not break your chain, we suggest investing in one of these.
WeThePeople Drops Bar Caps
$13.99
WeThePeople's Drops Bar Caps protect your barends and grips from damage when you have to bail on a less-than-perfect trick. The lightweight, CNC'ed aluminum caps bolt to your bars and keep things from getting scraped up when the bike hits the ground. • 6061-T6 aluminum
Odyssey Pivotal Seat Post
$29.99
It’s a traditional straight up pivotal design with a 200mm length.
Odyssey Springfield Brake Kit
$29.99
The Springfield Brake Kit will provide easy braking upgrades along with value, as the kit will be more affordable than buying each part individually. All necessary hardware will be included as well. Doesn't get much better! - One spring design - Comes with GHOST PADS - Hinged lever clamp - Medium sized lever
Odyssey Tom Dugan Fang Sprocket
$49.99
This is Tom Dugan’s all new signature sprocket. In addition to its classic look, the Fang increases in thickness towards the center of the sprocket for increased strength. - 7075 Aluminum - Sweet machining
WeThePeople Patrol Sprocket
$43.99 - $46.99
Much like the rest of the Patrol range, the Patrol Sprocket is based on the classic racing sprockets of the past. Ours uses a high-quality CNC construction and offset teeth for a perfect chain line. This thing was designed to crank fast, so of course we had to offer a 33T version for the guys that really like mashing the pedals. Bolt one onto your bike today and see how fast you can go.
GSport Uniguard Hub Guard
$14.99
The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered. Available in 14mm or 3/8?.
GSport G.L.A.N.D. MK IV Hub Guards
$9.99
The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.
Sunday Knox Sprocket
$49.99
Most of the Sunday team has been riding guard sprockets for a long time, so it was just a matter of time before they made their own. The Knox sprocket is made of 7075 aluminum and comes with a full guard on one side of the sprocket. It’s designed to fit larger chains like half-link chains so it’s compatible with any BMX drivetrain you have or want. It’s made super strong and will help protect your chain from being hit when slipping off a rail or messing up on a crankslide. - Machined out of 7075 aluminum - Full guard on one side of the sprocket - Designed to fit larger chains like half-link chains - 6mm thick
Sunday Cornerstone Grips
$9.99
Sunday's Cornerstone Grips rock traditional styling, current branding, and come in at 150mm in length with plenty of color options. It's not a bad idea to keep an extra pair around.
Odyssey Graduate Peg Replacement Sleeve
$5.99
The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly
Odyssey Gyro G3 Detangler Upper Top Plate
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
Shimano DXR Crankset
$379.99
In BMX racing, that first sprint from the gate is the most important part of the race. Shimano knows this, so their DXR cranks are unbelievably stiff, perfect for getting out in front for the holeshot. They borrow Hollowtech II technology from the Saint downhill cranks to make them rigid, light and super tough. They sport a narrow Q factor for smooth pedaling and steel pedal inserts for durability. When 2nd place just won't do, DXR is the answer.
Odyssey Monolever
$19.99
The Monolever was an instant classic and has become a clear favorite with pro riders around the world because of its familiar feel, smooth edges and variety of handle options.
Sunday Jake Seeley Signature Grips
$9.99
The product designers at Sunday worked closely with Jake to nail down a grip that is perfect for him. Jake's grip comes in at 160mm and features a gradually increasing rib width. This grip can be run either way, depending on which side you prefer. The grip also features a tapered core for comfort.
Odyssey 10-4 Bar
$79.99
The 10-4 Bar is the biggest bar Odyssey makes. It uses large radius bends, thicker walled, butted tubing, and a traditional 7/8-inch crossbar for superior strength and durability. These bars have a post-weld heat-treating which is guaranteed against manufacturer’s defects. Features: - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated Specs: - 10-inch rise - 30-inch width - 11-deg backsweep - 4-deg upsweep
WeThePeople Cable Straps
$12.99
Keep your straps tidy and out of your way, using WeThePeople Cable Straps. They're easy to install and look good. This 10-pack helps keep that ride clean and tight. - 10 straps included
Sunday Freeze Topload Stem
$29.99
Sunday’s Freeze Topload Stem uses a die-cast aluminum body with forged 6061-T6 aluminum face plate rocking an embossed Sunday logo. It has recessed sides and bottom section to reduce weight without losing an ounce of strength. With their careful material and design choices, Sunday is able to offer the same stem used by the Sunday team at a very affordable price. - Reach: 52mm - Stack Height: 33mm - Rise: 34mm (1mm drop when inverted) - Clamp Bolts: M6 x 1.25mm pitch (x4) - Pinch Bolts: M6 x 1.25mm pitch (x2) - Weight: 10.5 oz
WeThePeople Arrow 146 Grips
$9.99
WeThePeople's Arrow 146 Grips have the perfect texture and density to give you newfound confidence while railing it on the bike. Material: VEX rubber compound Size: 146mm x 28mm Specials: soft angled rib design with medium-sized flange; includes WeThePeople nylon barends
Odyssey M2 Brake Cable
$5.99
Compatible cable for M2 Monolever.
Odyssey Quartet Hub Guard
$24.99
Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs. SPECS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life
Odyssey Slim-By-Four Brake Pads
$8.50
The Slim by Four is a BMX-specific brake pad with a symmetrical shape designed for both forwards and backwards braking. A custom inner frame helps to stiffen the pad and prevents excessive braking power from being lost to flex. SPECS - Clear and Gum colored “Soft” compound pads provide extra grip on powder coated rims. - Black “Normal” compound Slim-By-Four pads are the most popular pad choice for most riders.
Odyssey Springfield Brakes
$17.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the two ordinary (and confusing) brake springs and replaces them with one central spring that applies the same force to each arm, requiring no additional adjustment. This makes assembly incredibly easy–just bolt it on and go. The brake arms are designed to maximize stiffness and save weight without adding excessive cost. By die-casting the arms and using shared tooling to make each side, the Springfield meets all of the original design goals, resulting in a very powerful and affordable brake.
Odyssey Bluebird Chain
$14.99
For the Bluebird chain, Odyssey took the proven and reliable KMC 510-HX chain and added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
Odyssey Graduate PC Peg
$18.99
The 4.5-inch peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve. - Sold individually - 14mm with 3/8” adapters only - Replacement sleeves sold separately - 4.5" (length) x 1.5" (outer diameter) - 4.5 oz (9 oz for a pair)
Odyssey Pro Headset
$26.99
Designed using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 10mm, 3mm and 2mm (15mm total) - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1-1/8 integrated headset. - 45º tapered bearings 41.8mm outer diameter (fits 42mm BMX head tubes).
Odyssey Quadrant Rim
$39.99
The QUADRANT uses a unique pinned junction design that allows Odyssey's lightest rim to also be their most affordable. With its offset spoke drilling, this rim is stronger than its weight suggests. The Quadrant is one of the few pinned rims that receives regular and unquestioned use by pro level riders. SPECS - 6000 series aluminum - Width: 34mm - Height: 18mm - ERD: 392mm - 36-H - 20 inches - 420 grams (14.8 oz)
Odyssey Retro Seat
$34.99
In addition to the anniversary sprocket, Odyssey also offers these retro seats that will coincide/match with their collaboration with Vans.
WeThePeople Arrow 115 Grips
$9.99
WeThePeople's Arrow 115 Grips have the perfect texture and density to give you new confidence while railing it on the bike. Material: VEX rubber compound Rubber durometer: 30° Size: 115mm x 28mm Specials: soft angled rib design with medium-sized flange; includes WeThePeople nylon barends
Odyssey 49er 4-PC Bar
$79.99
Odyssey's 49er is a traditional-looking 4-piece bar that uses multi-butted main tubing, traditional 7/8" crossbar for strength, larger radius bends for greater durability, and welded end caps to reduce flex. These bars have a post-weld heat-treating which is guaranteed against manufacturer’s defects. SPECS - 9-inch Rise - 29-inch Width - 1.5° Upsweep - 12° Backsweep - 2lbs 3.4 oz
Odyssey Aitken Tires
$25.99
Mike Aitken's popular signature tires for street and dirt. Ideal for use at high speeds. - 20 × 2.25, and 20 x 2.45 Dual ply casing
Odyssey Antigram Rear Hub
$179.99
The Antigram is a 36-H rear hub that is strong, light and reasonably priced with in-bound axle bolts that is both RHD/LHD switchable and guard compatible. SPECS - 2014-T6 forged aluminum hub shell - 6903RS sealed cartridge ball bearings - 9-T driver with 3-Pawn independent springs design and precision caged needle bearings - RHD/LHD switchable WEIGHTS - With 14mm Chromoly Axle: 14.5oz / 411g - MEASUREMENTS Drive Side - Effective Flange Diameter: 49mm - Non-Drive Side Effective Flange Diameter: 49mm - Drive Side Flange to Center Distance: 30mm - Non-Drive Side Flange to Center Distance: 30mm
Odyssey Broc Raiford Signature Grips
$9.99
Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.
Odyssey Gyro G3
$19.99
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.
Odyssey R25 Fork
$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
Odyssey Slim Seat Clamp
$8.99
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.
Stolen Thermalite Bar Plugz
$4.99
Unique design with Thermalite for durability. In-moldED Steel insert to eliminate bar punch through. Expands securely with a grub screw to fit tightly on regular, 9, 11, & 13 butt bars. - Expands securely with a grub screw to fit tight - Material: Thermalite - Weight: 1.0-ounces per pair
WeThePeople Supreme Seat Clamp, 25.4mm
$14.99
WeThePeople's Supreme Seat Clamp is great for adding a little bit of bling to your ride. This clamp is CNC machined from lightweigh 6061 aluminum and it works with standard BMX 25.4mm seatposts.
Odyssey Euro Bottom Bracket
$32.99
- For 19mm crank spindles and threaded Euro bottom bracket frames. - High-quality four bearing design with aluminum cups.
Shimano DXR V-Brake Levers
$36.99
Shimano's DXR V-Brake Levers are the choice of the pros, from the Olympics to the local race scene. They use a 2-finger design with Shimano's proven Super Linear Response system that gives you great power and feel with little effort.
WeThePeople Feelin' Tire
$32.99 - $33.99
WeThePeople's Feelin tire has a slick-tread design with a durable, grippy rubber compound, making it an awesome choice for the street and park.
WeThePeople Raptor Grips
$9.99
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends
WeThePeople Socket Pivotal Post
$35.99 - $57.99
WeThePeople's Socket Pivotal seat post is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and comes in the perfect color and size to match your bike. Plus, there's a 17mm socket head built into the bottom of the post for park-side adjustments to your wheels.
WeThePeople Supreme Bar Ends
$23.99
Protect your bars and prevent your grips from getting shredded with WeThePeople's Supreme Bar Ends. CNC machined from 6061 aluminum, these tough, bolt-in end caps protect your investment from tons of abuse when you have to jump ship on an imperfect execution of a trick. Simply slide them into the ends of your handlebars and tighten them up. Then, go nuts!
Odyssey 7KA Rim
$89.99
The original 7000 series aluminum BMX rim. This specialty grade of aluminum lets Odyssey produce a rim that is both lightweight and strong. The Seven-KA is a proven, go-to rim for pro-level riders worldwide. SPECS - 7000 series aluminum - Width: 34mm - Height: 17mm ERD: 390mm
Odyssey Aitken Knobby Tires
$25.99
A classic knobby version of the Aitken signature tire. Traditionally a more dirt-specific tire but the tire’s fast rolling center tread allows it to be used on all terrains. - 20 × 2.35 only Single ply casing
Odyssey Clutch Hub Guard
$9.99 - $22.99
- Press fit designed to work the hub's non-drive side collar.
Page 1 of 2 Next page