Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.
Osprey’s women’s-specific Verve 3 is the perfect size for short and sweet rides. The suspension is designed for moving light and fast: A foam framesheet spreads weight across a ventilated mesh backpanel for lightweight comfort. The BioStretch shoulder harness provides a contoured fit and the webbing hipbelt is removable to shave ounces. If you end up carrying extra weight, top compression straps lend extra load stability. Access gear in the main compartment via a zippered front panel. You can slip small items into the harness pocket or stash a layer in the front fabric shove-it pocket for quick access. Bike-friendly features include a Hydraulics LT 2.5 liter reservoir with magnetic bite valve retention, internal bike pump storage loops, and Osprey’s innovative LidLock helmet attachment system. Suspension - Atilon foam framesheet allows dynamic body movement while it spreads load across the entire back panel Airscape Backpanel - Mesh covered ridged foam allows maximum ventilation while keeping the load close to the body Biostretch Harness - Mesh covered die cut foam provides an active and contouring fit and ventilation Webbing Hipbelt - Removable 20mm webbing ride stabilizing hipbelt Additional features: - Upper Side Compression Straps - Dual upper side compression straps help stabilize the load - Front Shove-It Pocket - Front panel shove-it pocket with zippered organization pocket helps gear accessible and systematized - LidLock Helmet Attachment - An elasticized LidLock™ helmet attachment system provides storage for your helmet - Blinker Light Attachment - The blinker light attachment strap found near the base of the front panel of the pack allows for quick light attachment for high visibility in the dark - Hydration Compartment - Hydration sleeve with direct access zip offers fast loading. Hydraulics 2.5L LT reservoir included - Harness Pocket - Stretch mesh harness pocket provides easy access to energy snacks and other quickly needed items
A cage that won't slow you down This OCLV carbon fiber cage is so lightweight you'll hardly know it's there. (That is, until you reach down and remove your water bottle with ease.) Recommended for on-road use with small water bottles. - Strong and lightweight OCLV Carbon construction - Secure bottle retention designed for road bikes - Recessed bolts allow smooth bottle transition and better derailleur clearance - Includes lightweight alloy mounting screws - Weighs only 20g
Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The Delta 200 mounts on the saddle rails for no measurable drag. Our most popular single rear carrier includes Xlab's Gorilla XT carbon cage which provides a tight 14-pound grip on your bottle. It mounts to most standard metal-rail saddles (for carbon rails, purchase the optional Delta Adapter). For a complete system, purchase the optional X-Strike Inflation Kit and store up to 4 CO2 cartridges.
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage
Osprey's Rev 1.5 hydration pack is a perfect lightweight companion for quickly navigating the trails. Its Biostretch harness moves with you during high activity endeavors, offering stability and comfort. A 1.5-liter Hydraulics LT Reservoir ensures you are properly hydrated while harness pockets store an extra water bottle and food so you can refuel on the go. The main compartment and outside bungee cord allow you to carry extra layers so you're ready for unpredictable weather. Plus, the Rev 1.5 features a sunglasses pocket and an easy-to-access DigiFlip pocket for your phone.
Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.
The EVOC CC 2l is a very handy, ultralight backpack. It's our minimalist hydration pack solution. - AIR TUNE SYSTEM offers a maximum of back ventilation - Accommodates hydration systems up to 2L (included) - Cellphone pocket
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.
Profile's Axis Karbon Kage is kutting edge! Tipping the scales at just 33 grams, this is one of the lightest cages available. And, the carbon’s fine grip prevents bottle launch no matter where you mount the Kage. Plus, it adds a sweet look to your prized ride!
An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible. - 100% 3k Carbon - LockTight Wings - Hand-painted - Road and MTB approved - High-end and durable
XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.
XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.
For off-road riders who give up seat packs for dropper posts, Rapid Pack is perfect for mountain bike rides lasting two hours or less. Designed with a sleek esthetic that makes you feel like you aren't wearing your uncle's fanny pack, this bag holds all your essentials when cargo pockets are being used and hydration packs are overkill. Key Features - Lightweight stretch woven material is durable and works with the body's natural movements - Ridged foam back panel for breathability and comfort - Two zippered security pockets hold essentials - Left side opening features internal mesh pockets for easy gear organization - Middle waterbottle pocket centralizes weight while riding - Right side opening features internal mesh pockets with compression phone sleeve and key fob - Fits most tubes including fat bike and plus sized models - 100 cu. in. (1.364l) capacity
For everything you need and nothing you don't, Hydrapak's Avila is the answer. Its ultra-lightweight frame and Speed Harness Ultimate Mobility Straps make the 70 ounces of water in the Reversible Elite Reservoir practically disappear from your back. Plus, a key clip and mesh pocket lock in your essentials.
Lezyne's Road Drive Carbon Cage is a lightweight cage made of FCT carbon fiber with optimized architecture for accommodating a wide range of bottle shapes and sizes. The strong cage ribs, top catch and bottom bridge are designed to increase cage strength and grip, preventing bottles from ejecting. A pump bracket is integrated into the cage body. With the included Velcro strap, a Road Drive pump can be held securely in place. The low profile design and ovalized mounting holes allow this cage to fit on both small and large frames.
XLAB's Mini Wing System is an all-in-one rear hydration system that is light on the budget. It includes 2 XLAB P-Cages, their Mini seat bag and 2 sturdy mounts. This aero add-on is super adjustable too. Place it high for zero drag, or low to make it easier to swing your leg over. The cages can also be raised or lowered, and positioned outward for easy access. The Mini bag has an extra-long strap for easy on/off, and the whole system fits on most seat rails with the included hardware. The cages have a whopping 5-pound grip on the bottles to keep them in place on even the roughest roads, too.
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. Two options are available with the Elite 90 designed especially for triathlon speci c saddles with vertical rear rails and the Elite designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included/Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Having trouble getting your bottle out of your cage? Upgrade to XLAB's Sidekick Carbon Cage! It's specifically designed for use with aero frames, tri bikes and other rigs with small front triangles. Plus, its side-loading design lets you slip your bottle in and out at a comfortable angle so you won't have to struggle with a stuck bottle ever again. It's also crafted from carbon for an impressive weight of only 34 grams. And, it boasts a whopping five pounds of grip force so it keeps bottles in place over even the roughest pavement. - Ideal for fastest frame bottle access and for small frames - Low cut sides for rapid bottle removal and insertion - Wide center opening permits sides to flex outwards for easy bottle withdraw - Special flared entry lip for fast bottle access and insertion - Long thick lower shelf prevents large heavy bottles falling through cage bottom or breaking off tab - Matches XLAB Gorilla cages rear carrier Anti-Launch, and Chimp cages
It's finally here—the perfect pack for the mountain biking minimalist. Ideal for quick laps on local singletrack or gravel trails, the Savu lumbar pack has two rigid pockets that make it easy to pull and replace water bottles as you pedal, so you can stay hydrated without stopping. Angled hipbelt and compression straps keep the pack close to your body and provide maximum stability over every type of trail. No creep-around here. Not a two water bottle kind of ride? No problem. Each water bottle sleeve can tuck away when not needed to provide a streamlined pack. Any way you customize it, the main compartment and side hipbelt pockets will fit vital flat-fixing tools, a tube, snacks, and other small mountain biking essentials. LUMBAR CARRY - For riders who require hydration, but prefer the off-the-back carry and minimalism provided by lumbar packs. RIDE STABILITY - Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. BOTTLE CARRY - The perfect solution for stable lumbar carry allows you to access your bottles with ease. For short rides without water, the bottle pockets compress to maintain stability and keep the pack close to your body. Water bottles not included. FEATURES - AirScape backpanel with contouring lumbar wrap provides maximum stability - Dual snap-in-place or tuckaway water bottle sleeves - Easily accessible zippered main compartment with internal tool organization - Dual zippered hipbelt pockets - Blinker light attachment * Water bottles not included AIRSCAPE LUMBAR BACKPANEL - Extra thick ridged foam with center air channel for excellent ventilation HIPBELT - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit
Xlab's Torpedo Mount allows you to place a bottle and cage horizontally between your aero bars. This reduces the front area of the bottle by 68%, giving you appreciably less drag than upright bottles. Four straps with silicone grips hold the Torpedo in place and provide full adjustability. And, the Torpedo fits aero bars from 9 to 14cm apart and requires no tools for installation/removal.
Torpedo System 50+ is the perfect refillable aerobar hydration system for the beginner triathlete. Unbeatable price + top features outshine any competitive choice. Includes: - Bottle and Bottle Accessories: Bottle, Straw with Bite Valve, Slotted Lid, Spare Straw Hole Plug - Nylon Composite Vee Cage - Aluminum Torpedo Mini Mount - Mounting Accessories: (4) XTS Mounting Straps Easy to Ride - Stop reaching down to frame bottles for a drink. Keep both hands on the aerobars and simply take a drink from a straw positioned directly under your mouth. Easy to Drink & Refill - 2 possible straw locations to customize your setup - Drink Valve makes drinking even faster by keeping fluid ready near top of straw. - Split Refill Lid allows for easy refilling while on-the-go. Wide diameter allows for on-course Aid Station Bottles for easy mid-race refills. - No lid to flip out of the way, just simply put the full bottle into the easy access split refill hole. Easy to Clean - One-piece body ensures no leaking! - Bottle made in the USA and is lead free, BPA-Free and HDPE food safe certified - TRUE 26 oz bottle capacity (768 mL) Quick Install - Adjustment width fits bars 80mm – 130mm (center-to-center) - No tools required for fast installation and removal. Simply loop straps around aerobar extensions and tighten. Easier to Handle in Winds - Bottle designed to mount further back allowing easier steering for the rider No Need to Sacrifice Aerodynamics Even at the Entry-Level - Aerodynamically Invisible bottle design used by all XLAB Torpedo Systems - Contoured design to fit your arm shape. - Small frontal area that allows a clean airflow around the bottle - Kamm tail. Reduces drag by 50% - Airflow straighteners designed into the bottle to gather airflow for a clean, straight exit air flow
This rear-mounted hydration system holds two bottles and attaches directly in front of seatpost for easy hydration on the go. - Full angular adjustment allows bottles to be rotated - 6061-T6 aluminum construction - Brackets included to mount two Co2 cartridges - Fits 31.6mm to 27.2mm seatpost with shims (included) - Includes two cages and 6061-T6 Aluminum clamp and extension
Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design. - Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100. - Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars - On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data - High-grip design holds bottles tight – yet bottle insertion and removal is easy All Inclusive System - Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle No-Fuss Installation, Comes Fully Assembled - No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down - Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away. - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Easy Glide Cage Design - Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red Drink Fast with Self-Sealing Nozzle - No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself. - Compatibility: Wahoo and GARMIN-specific - Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 177g (without bottle or computer) - Length: 145mm/5.7 inches - Bottle Grip Force: 4lbs Construction - Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Aluminum Alloy - Cage: Nylon Composite VULCAN CAGE - Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip Warranty: - 2 Year Limited Warranty
This pack pulls from Osprey's Viper and Verve series hydration packs to create the perfect fit for your younger riders. The Moki is a streamlined hydration pack, sporting a 1.5 liter reservoir for on-the-go hydration, a blinky light attachment, and a small, zippered external pocket to help your trail companion stay organized.
An absolute masterpiece, this cage screams style. The Fly Cage Limited's clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Limited with its LockTight design, which keeps bottles secure while remaining accessible. Each cage is hand-painted and is extremely limited. - 100% hand-painted aluminum - LockTight Wings design - Laser-etched design - Road and MTB approved - High-end and durable
- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)
Fit for fondos, ready for races The carbon construction of the Pro Carbon Water Bottle Cage provides climbers with a lightweight solution that securely holds bottles over train tracks, rough roads, and rocky terrain. Ideal for both road and mountain bikes and available in a multitude of colors to suit your style. - Full carbon construction - Secure bottle retention suitable for road and mountain use - Includes lightweight alloy mounting screws - Available in a variety of colors - Weighs only 29g
The full carbon construction of the RXL Carbon Cage provides climbers with a lightweight solution while the robust design securely holds bottles over train tracks, rough roads, and rocky terrain. Ideal for both road and mountain bikes. Key features: - Full carbon construction - Suitable for road and mountain use - Includes alloy mounting screws - 23g
$25.00 - $45.00
An absolute masterpiece, this cage screams style. The Fly Cage Ano’s clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Ano with its LockTight wing design, that holds bottles securely while keeping them accessible. - 100% anodized aluminum - LockTight Wings - Laser etched design - Road and MTB approved - High-end and durable
Innovative design with side and bottle insertion/removal - Carbon injection bottle cage - Extremely light, 25 grams - Compatible with all frames, ideal for sloping tubes or small sizes
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
Profile Design's Razor 2 Bottle System consists of their featherweight Profile carbon Kage and their 20-ounce Razor aero bottle. Adding this aero beauty to a triathlon or time trial bike is one of the best, easiest and most affordable ways to streamline your machine more for additional free speed. It fits nicely on road bikes, and improves the aerodynamics there, too.
The Crono Cx FRP Kit is an aerodynamic bottle and bottle cage combination designed and tested in a wind tunnel. - Bottle cage with monocoque fiber-reinforced (FRP) material structure -Bottle with exclusive surface designed to maximise air penetration, and cap with membrane technology - Complies with UCI regulation - Available also with carbon bottle cage
The Aero HC Bracket Kit from Profile Design lets you attach a water bottle and computer mount in between your aero extensions. It fits aero extensions from 85mm to 120mm wide so you can use the bars of your choosing.
Kit-match with a new customizable high-grip carbon cage! Customize Your Cage Colors - Personalize your look with Raptor Talons available in multiple colors - High-grip carbon cage with approx 6lbs grip force - Svelte design for a streamlined look - Weight: 1.0oz (30g) - Pair with the hyper-reflective Cool Shot insulated bottle Grip Force - Approx 6lbs grip force for excellent bottle retention Optimized Carbon - Unidirectional carbon inside and 3K carbon weave outside Ideal Uses - Road - Triathlon (Aerobar and Frame) - Gravel - Mountain - Weight: Approx 30g (1.07oz) - Grip: Approx 6lbs - Construction: Carbon Fiber - Includes: Corrosion resistant Black Zinc screws - Warranty: Limited 3 Year
Introducing XLAB's latest generation of their Torpedo Mount, the Torpedo Mini Mount Aluminum. XLAB's Torpedo Mount lets you carry hydration and computers on your aero bars and actually reduces your aero drag, too! The Mini is narrower to accommodate the trend to running aero extension bars closer together, and it's longer to support XLAB's new horizontal Torpedo bottle (sold separately). Plus it offers high adjustability for easy fitting. Best of all, a designated slot up front allows you to position your computer for easy viewing. No more looking down to see your data! Go with the originators of the horizontal bottle mount; choose the experts: XLAB!
The B-Tab is a low-profile horizontally-mounted BTA (between the arms) system. It features the versatile Side Axis Kage which allows riders to choose either a left or right side bottle release. The system can support both standard water bottles and the Aero HC. Alternatively, the system can be rotated to mount a standard bottle vertically. A hinged bracket design allows for quick and easy install and removal. - Can be rotated to mount vertically - Compatible with 31.8mm basebar - Offset design provides fore/aft adjustment - Hinged bracket design for quick installation and removal - 10mm wide bracket
- Stainless steel cage with a black vinyl coating - 5" Outer diameter cage velcros on any size frame tube or seat post - Will not scratch metal bottles or remove paint - Not recommended for glass - Proudly made in chicago, Illinois
Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams
CamelBak's Antidote Reservoir ensures easy hydration. Its polyurethane reservoir features laser-welded seams for incredible strength with minimal weight. A wide mouth-opening makes filling, cleaning, and adding ice simple, while the quarter-turn cap seals with a click and re-opens effortlessly. An internal center baffle distributes fluid and weight evenly. Camelbak’s Quick Link system has an auto-shut off mechanism so you can disconnect the hose for hassle-free refills. The Antidote also features hidden dryer arms that hold the reservoir open after cleaning.
- Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in
CamelBak's Delaney is the perfect hands-free way to carry fuel on your runs. It holds a 21-ounce bottle out of the way on your lower back. Weighing only 7.1 ounces, the Delaney has enough room for your phone, keys, and an energy bar.
• Constructed of impact resistant Nylon • Carry lightweight roundish objects such as insulated Nalgene bottle holders, thermoses, Gatorade jugs, small dry bags, and ultralight sleeping pads and shelters • Mounts to water bottle cage mounts via Salsa’s Three-Pack pattern • Includes two nylon straps • Cargo Weight Limit: 6.6lbs (3kg) • Cage Weight: 149g
EVOC HYDRATION BLADDER for backpacks - makes our backpacks hydration packs. - BPA/PVC-free - Quick fastener (hydration tube and hydration bladder) - Mouth piece (lockable) - Opening (wide, easy to fill) - Taste-neutral
- Buttons improve grip on waterbottle - Welded tubular stainless steel construction
Topeak's iGlowCage will turn your night ride into a wild adventure! Ingenious integration of a super bright RGB LED into our water bottle cage gives you multiple choices of color to illuminate the included clear bottle for 360 degree visibility.
Osprey’s Hydraulics LT 2.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
The lightest hydration belt. If you’re looking for hydration and minimal storage, grab the new Ultralight Belt. It’s a no-frills, unisex design made to comfortably fit runners of any size. - 2 x 10-ounce bottles - Lightweight belt with Helium Hex airflow - Clip-lock security bottle holster - Custom fit closure with micro storage pocket - Detachable micro race locks - Dimensions: 16.54 cm L X 5.91 cm W X 4.13 cm H - Weight: 300g with bottles - Waist Size: 24" - 40"
Discover freedom with Cenote – the first disposable hydration system with recyclable reservoirs. Durable, but priced for a single use, Cenote makes cleaning optional. So, go ahead use your system however you want, for as long as you want. And when you’re ready, just replace with a fresh Cenote reservoir. - Disposable/ fully recyclable - Fits most backpacks - Premium, high flow 360-degree locking bite valve - Removable cap gasket for easy cleaning - Lightweight and easy to fill - BPA free, and no chemical coatings - Replacement components sold separately - Wide mouth opening is easy to fill, and fits hand-held filtration systems and Polar Bottle caps
- Allows for tool-free removal of your water bottle cage from your frame - Especially useful for quickly and easily removing a bottle cage before a race - Compatible with nearly every existing water bottle mount on your frame - For best compatibility, use with Bontrager RL or RXL bottle cages - Also compatible with some other bottle cages - Do not torque installation fasteners past 1.5Nm
The Aerodrink BTA bracket offers secure bolt-on bottle mounting to aero bars and adapts to a variety of extensions. It includes a durable restraining strap for easy bottle installation and removal and an adapter to fasten horizontal BTA hydration systems. - Fits single and dual chamber systems along with horizontal BTA systems (with included adapter) - Attaches to bars with bolt-on adjustable wings that adapt to different aero bar width extensions - Adjusts to 140mm wide - Compatible with Profile Design FC25/FC35 hydration systems, Aero HC bottles, Aqualite bottles, Aerodrink bottles, Aquacell bottles, and standard bottles and cages - Made of Injected Nylon and Glass fiber - Weight: 130g
Osprey’s Hydraulics LT 1.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning, and most importantly, staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.
- Stainless steel cage with 24 ounce screw top bottle - Cage Velcros on any size frame tube or seat post
Made with a mix of materials - a carbon shell and glass fiber core - the Ciro bottle cage is optimized to be as light as possible. It's shaped to clamp the bottle very tightly, and has been given a minimalistic design so it does not upstage your bicycle.
The dream of summer is alive and well all year round thanks to this fun little number. Keeps stuff cold when it’s warm out and delays things from freezing during the winter. Pretty handy stuff! These bottles are made in the USA by Specialized using their Purist Technology. - Capacity 23oz - Origin USA
Keep your water cold 4x longer! We re-engineered our legendary Podium Ice to be the ultimate insulated cycling bottle, even when temps rise into triple-digits. With unmatched aerogel insulation technology, high flow rate, and easy cleanability, the Podium Ice stands second to none. And like our entire Podium collection, it's 100% free of BPA, BPS and BPF and features improved cage fit and the squeezability that CamelBak is known for. - Aerogel Insulation: Keeps water cold 4x longer than other bottles - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.
Page 1 of 5 Next page